Scope of Changes

• Version 1.0

  • Added:
    • First version issued

• Version 1.1

  • Added:
    • GPIO Wiring for External Loads integration example

• Version 1.2

  • Added:
    • Operate in a Limited Operation Environment - Quick start section
    • UDP Failed Connection - Troubleshooting section
  • Fixed:
    • Correspondence between pins 5, 6, and 7 and their I/O signals on the Pinout list

• Version 1.3

  • Added:
    • Reference to the explanation of the Ethernet connection in the Basic Connection for Operation - Quick Start section
    • Firewall Configuration - Quick start section
    • Remote ID as compatible device

• Version 1.4

  • Changed:

    • MEX as Magnetometer Honeywell HMR2300 integration example has been renamed to MEX External Magnetometer

  • Fixed:

    • Pins 45 and 46 on the Pinout list

  • Removed:

    • Magnetometer Honeywell HMR2300 integration example

• Version 1.5

  • Added:
    • 'Tip' in Silvus radio configuration
  • Fixed:
    • Pin 11 on the Pinout list
    • Fixed Wing Airplane and Helicopter images Connection Examples

• Version 1.6

  • Added:
    • 'Important' in Location - Hardware Installation about the internal magnetometer.
  • Fixed:
    • Reference to the internal 4G module of Autopilot 1x in BLOS Communications - Operation to clarify it is not available on PCS
    • GNSS antenna - Mating Connectors - Technical changed max current from 20 mA to 50 mA